2008 Chevrolet Corvette Coupe - Silver Scorcher

Every Corvette is a car to see and be seen in. This one will get you seen by everyone. Specter Werkes/Sports of Troy, Michigan, has performed its GTR styling-and-performance magic to the sixth-generation Vette. What you see here is the first production example of it-the C6 Corvette GTR.

What was it that first caught your eye? Was it the BASF Liquid Silver finish? Likely it was the distinctive bodywork underneath it that wears that color so well. There's a reason it doesn't just look like another well-intended aftermarket conversion-it looks like a successor to such Vettes as the Corvette SS of 1957, the original Sting Ray of a couple years later, as well as the CERV experimental vehicles. "I used to work at GM Design," says Jeff Nowicki, Specter Werkes' founder and president, who designed the C6 GTR's bodywork. "We wanted something that looked like the OEM could have done, instead of making it look like an aftermarket package."

But there's more to the GTR than a fresh set of body panels. Those wheels-Forgeline 19-inchers in front and 20-inchers in back, wrapped in Michelin Pilot Sport ZP rubber-front a set of StopTech disc brakes that can haul this car down to zero from the big numbers in a retina-stretching hurry. At each corner is a suspension system built around aluminum upper and lower control arms, monotube shocks, and Hotchkis stabilizer bars-to keep it stable no matter the number on the 0- to 200-mph speedometer.

Then there's that engine. If a production Corvette LS3 powerplant is good, Specter's Matrix II version of it is beyond incredible. The light-alloy block now houses a set of Mahle forged pistons and Manley forged rods atop a Callies 4340 stroker crankshaft that bumps the displacement up to 418 ci. Add in hardware like a Specter-developed camshaft (produced by Comp Cams) with its own unique grind, larger combustion chambers, stainless-steel long-tube headers, and a low-restriction Corsa exhaust system, and you've got an engine that twists the dyno dials to 535 hp and 530 lb-ft of torque at the back wheels-or more, depending on camshaft selection. "There's a lot more available in that engine, but because it went to Colorado, we had to tone it down quite a bit," Jeff says of the work that went into making the first C6 GTR a good runner in Colorado's mile-high-plus altitude while keeping it emissions-legal. "We had to put a lot smaller cam in there," he adds about one of the biggest changes he made from its previous lower-altitude configuration.

Even so, that's a lot of power, and it takes some getting used to. "It actually kind of scared me the first few times I drove it, with the power and handling," says owner Mike Cowan of Longmont, Colorado. "I wasn't used to that kind of performance out of it." Mike also has an '05 Corvette that he's had a few upgrades added to, but nothing like what Specter designed for his GTR.

It also took Mike time to get used to the attention the GTR body panels and BASF Liquid Silver finish drew, too. "With this car, everywhere I go, even if I'm just driving around, everybody stops and turns their heads," he says. "This car's the only one around with the style that it has. It's a head-turner, that's for sure."