What do you call a Corvette that endured robust driving by its first two owners, then the ravages of tropical weather for over two decades? You'd call it what second owner Arnold Yuen calls it: "Beautiful!" Arnold discovered it while he was stationed at Amarillo (Texas) Air Force Base, a navigator in a B-52 crew assigned to the 461st Bombardment Wing, Strategic Air Command (SAC), United States Air Force. While off-base one day in December 1963 at Plains Chevrolet in Amarillo, he and a buddy spotted something in the back of the dealer's shop. "We saw the Sting Ray sitting in a back corner, and I asked, 'What is this Corvette doing back there?'" he recalls. "One of the mechanics said, 'That's the service manager's-he didn't register it. He got too many speeding tickets with it, and he didn't want the cops to find it, so he put it there.'" The mechanic added that the dealer was looking to sell the unregistered and untitled Sting Ray. After a talk with the Plains Chevrolet's sales people, Arnold was the first registered and titled owner of a nearly-new Sting Ray, optioned with the RPO L76 340-horsepower 327, M20 four-speed, and J65 sintered-metallic brakes.
Modern whitewall radials give...
Modern whitewall radials give up-to-date handling, while '63-style knock-off wheels give the Yuen's Sting Ray the classic C2 look.
That Corvette soon became Arnold's primary off-base activity while he was stationed at Amarillo AFB. "Being a single person from Hawaii in Texas back then, there weren't too many opportunities to do things," he says from his Frisco, Colorado, home. "When you got off of Alert, you wanted to do something! Amarillo at that time wasn't a big town, so I used to cruise all over the place with it and just have fun."
Eventually, orders took Arnold to Vietnam and then to Hawaii, and he was accompanied by his beloved Sting Ray. Follow-on orders sent him (and by then, his family) to Japan and then to Germany. While on these assignments he chose to store his '63 in Hawaii, at his father's place. "All he had was a carport," Arnold remembers. "I covered it up and said to my brother, 'You can use it, but keep it in good shape.'" When he returned to Hawaii from Germany in the early '80s, the semi-outdoor storage and Hawaii's weather and climate had taken their toll on the Midyear. Seeing the car again for the first time in years, the family took note of the Corvette's condition. "My young daughter said, 'Dad, you've got a plant growing in your car!' Arnold says. "I said, 'You've got to be kidding me.'" She wasn't-there were ferns growing inside the car in the rear right sidewall, below the window, plus standing water in the footwells; water and humidity had severely damaged the Vette's interior. "And my wife was livid"!
The gas filler door for '63...
The gas filler door for '63 is a one-year only design and probably the most stunning.
Soon after, he was stationed in the States (at Travis AFB, located between San Francisco and Sacramento), and had thoughts of replacing the '63 with a similar one that he'd located in Phoenix. "My kids said, 'Dad, that's the one that you played around in when you were a bachelor, it has fond memories for you. If you sell it now you may have regrets in the future. You should keep it and restore it; go ahead and get it fixed!'"
He had California Street Machine in nearby Suisun City, California, freshen the 327, adding custom JE forged pistons and valveguides that enabled the use of modern-day unleaded fuels. The body and chassis were sent off to Classic Cars LTD in Spokane, Washington. Arnold says the '63's original body reinforcements hadn't endured the years well. "The only thing I had to change out was the birdcage frame under the body, because the frame attachment bolts on it had rusted solid," Arnold says. "They had to find another birdcage, which they found in Southern California." It turned out that birdcage was from a '66 coupe that was wrecked while preventing a kidnapping (a story that Reader's Digest magazine later picked up on).
As for the frame under the car, no such replacement was needed-thanks to some preventive/protective maintenance Arnold had done years earlier to protect against the ravages of wintertime road salt. "The factory frame protection wasn't enough, so I had the frame Ziebarted," he recalls.
Optional RPO L76 340-horsepower...
Optional RPO L76 340-horsepower 327 was expertly rebuilt by California Street Machines in Suisun City, California. Original heads and Carter AFB carburetor were restored and bolted back onto bored-out-and-magnafluxed OEM block.
Inside, the restoration job went to Craig Nichols' shop in Coeur d'Alene, Idaho, where the small jungle that had taken root was replaced by a reproduction red vinyl interior, and the stock signal-seeking AM radio and dash gauges were rebuilt.
Since the restoration of Arnold's split-window was completed, it's been shown more than a few times, and Arnold and his wife, Sydney, take it to events with their fellow Looking Glass Corvette Association members. At the first NCRS sanctioned judging he entered, he was awarded NCRS First Flight. "They told me at the Rocky Mountain NCRS meet, 'A few little things, and that car can earn Top Flight,'" says Arnold, who's since replaced the Hurst shifter seen here with a restored original M20 four-speed shifter, one of the things he's done in order to get the car to Top Flight.
Even if your travels haven't taken you around the world as Arnold's have, it's likely you've seen a long-time-stored Corvette. If you're thinking about doing something with that barn find, Arnold has this advice: "You need to look at the frame. When I took my body off, the first thing that I checked was the frame. If the frame is totally gone, I would suggest thinking about getting another frame, if you want to go NCRS."
Data File: '63 Chevrolet Corvette Sting Ray coupe
Hawaii's tropical climate...
Hawaii's tropical climate also took its toll on the '63's cabin during its long-term storage. Craig Nichols Restoration Services did away with the growing tropical foliage and restored the red-vinyl seats and interior trim.
Owned by Arnold and Sydney Yuen, Frisco, California
Restored original production '63 Sting Ray coupe body
Restored by: Classic Cars LTD., Spokane, Washington
Replacement parts: '66-vintage coupe body "birdcage"
Paint: A repaint in the original RPO 941 Sebring Silver color
Painting & prep: Classic Cars LTD., Spokane, Washington
Restored production '63 Sting Ray, with original frame
Restored by: Classic Cars LTD., Spokane, Washington
Suspension: Restored '63 Sting Ray four-wheel independent suspension (Front) Coil springs with upper/lower A-arms, anti-sway bar and tubular Delco shock absorbers (Rear) Independent rear suspension with lateral struts, radius rods, transverse leaf spring bundle and tubular Delco shock absorbers
Steering: Restored GM/Saginaw "quick ratio" recirculating ball, non-power-assisted
Brakes: Restored RPO J65 GM Delco drum-and-shoe brakes with sintered-metallic linings, non-power-assisted
Wheels: Cast-aluminum 15x6-inch "knock-off" wheels with three-prong spinners and '63-style as-cast finish
Tires: Big O "Eurotour" whitewalls, 205/75R15 all around
Modified Chevrolet overhead-valve small-block V8, cast-iron block, RPO L76
Engine modified/built by:
California Street Machines, Suisun City, California
Block bored .030-inch over/magnafluxed, JE custom forged pistons, 427-style oil pump, double-row timing chain, anti-surge oil pan
332 cubic inches
Modified OEM Chevrolet cast iron, casting #3782461(Magnafluxed, ported, polished; CC'd and fitted with hardened valve seats and bronze valve guides).
OEM GM/Delco points-style ignition with Delco distributor (#1111024)
OEM Carter AFB four-barrel carburetor (#3826004) atop original aluminum intake manifold
Reproduction OEM Corvette dual exhaust system with cast-iron manifolds and steel pipes
340 @ 6,000 rpm (advertised)
344 ft-lb @ 4400 rpm (advertised)
Restored original Borg-Warner T-10, close ratio (RPO M20). A restored original shifter with reverse lock-out T-handle has replaced Hurst shifter seen in photos.
Original '63 Sting Ray with fixed differential containing 3.70 rear gears and RPO G81 Positraction, plus U-jointed half shafts
Restored original '63 Sting Ray coupe
Restored by: Craig Nichols Restoration Services, Coeur d'Alene, Idaho
Seats: Restored '63 Sting Ray red vinyl buckets
Carpets: Reproduction '63 Sting Ray red nylon loop-pile
Instrumentation: Restored original '63 Sting Ray (0-160 mph speedometer, 0-7000 rpm tach with 6300 rpm redline, plus ammeter, oil pressure, coolant temperature and fuel level gauges)
Sound system: Restored original RPO U65 GM/Delco signal-seeking AM radio with single speaker
Heater: OEM GM-Harrison heater-defroster
Though the Yuen's '63 had...
Though the Yuen's '63 had high-performance engine and chassis options, the interior was standard-level vinyl. Water and humidity took its toll on the original carpets, seat covers, and trim, which Craig Nichols brought back to showroom-new shape.
While stored in Hawaii during...
While stored in Hawaii during the '60s and '70s, ferns took root in the Sting Ray. Thanks to Classic Cars LTD's expert restoration, you can't tell this '63 from a new one.
Sydney (front) and Arnold...
Sydney (front) and Arnold Yuen show their split-window '63 at big Vette shows, as well as events put on by their club, the Looking Glass Corvette Association.