1973 Chevy Corvette Stingray - Red Rod

Kerry Detwiler's '73 Stingray convertible was a "10-footer" when he discovered it, but his first look at it was from farther away, while on a Vette-hunting trip from his home in Harleysville, Pennsylvania. "I was going from my house to Lebanon, Pennsylvania, to look at another Corvette-a blue-on-blue '70 or '71," he says of the trip where he was seeking a chrome-bumpered Shark. "On the way up, I passed a car dealer's used-car showroom, and they had a '73 and a '67 nose-to-nose in the middle of the showroom."

Kerry says he thought that dealer would be asking too much for the '73, and kept on toward Lebanon. There, he found a chrome-bumper Shark all right-one for which the term "20-footer" would be too kind a description. (Maybe "20-miler" would have been more accurate.) "It was a real piece of crap," he recalls. "It certainly wasn't anything you were going to want to drive. I was looking for something that, if it was a little rough that was OK, but I wanted to be able to drive it and be proud that I was driving a Corvette at the time. I was there for a couple minutes, and then I turned around and came back."

On his way home, he decided to stop and look at the '73. That's despite the fact that he had his heart set on a '68-'72 Corvette and not a '73-'82 rubber bumper C3. "I figured, what the heck, I'll look at this car," Kerry says. "I crawled all over it, but I really wasn't sure that I wanted it." Kerry thought about it for a few days, then called the dealer and, before long, made the deal and brought it home. It drove all right for a 20-plus-year-old used car, one with some visible flaws. "It had stress cracks in the body, but it was a 10-footer," says Kerry. "From 10 feet on back, the car looked great."

If you know anything about unrestored Corvettes, you know they can hide a lot of problems. Kerry soon found out that this one had "bodywork by committee" performed on it. "There were body parts from at least three different cars under there, based on the base paint colors that we found when we stripped it." But that wasn't all they found. "The whole passenger-side door was rotted," he adds. "You never would have known that by looking at it from the outside. Denny Widman-the guy who worked on it-said, 'I've never seen one like this. There's nothing left.' So, we replaced that whole door."

They also decided to replace the '73's front bumper and its age-related flaws; at the same time they chose an RM Diamont custom-mixed dark metallic red paint scheme with flames blended from metallic gold/purple/light red. "I wasn't real keen on it at first, and then we started looking at them," he says of the replacement bumpers considered before choosing ACI's '80-style nose. "When I saw that we could use the stock '73 grilles inside it, we put it together with an air dam underneath, and I really liked how it looked."

Not only did the body get the attention it needed, the '73's mechanical systems also needed help-and got it. When he bought the Vette, its brakes worked, but a look under the car while at the nearby Watash Speed Shop in Lansdale, Pennsylvania, was very revealing. "Once they got underneath it, they said, 'You've got to fix it!'" Kerry says. "The brakes that were on it were wasted. It was a miracle they stopped the car." Off came what was left of the original brake system, replaced by new hardware from Vette Brakes and Parts (VBP). "They put all-new brakes on it, with stainless-steel sleeved calipers and DOT-5 silicon brake fluid," says Kerry. "For having manual brakes, it stops pretty good. You've got to give it a push, but it'll stop. Four-wheel-disc is four-wheel-disc."