Rebuilding The '84-'96 Corvette Steering Assembly
|
Install the reservoir and connect up the supply line and cooler line with new hose clamps. Bolt on the alternator and the air pump again, and you’re ready to fill the system with fluid. Fill the system with fluid and start the car. Let it run for a while and add fluid if necessary. Once the fluid level is stabilized, turn the steering lock to lock five or six times to work the fluid through the system. Then turn the car off for 10 to 15 minutes to allow any air bubbles to rise. Start the car and check for leaks and the fluid level. If everything checks OK, take the car for a drive and find out all over again how much fun it is to take corners. View Related Article
|
|