Replace Shocks, Springs, Sway Bar and Bushings Photo Gallery
To attach the ball joint to the lower control arm, place the ball joint into the control-arm slot. Be sure to place the ball joint so that the grease fitting will attach to the top of the assembly. Notice the two types of bolts: one with a standard bolt head and one with a metal stop on the bolt head. The bolt with the stop goes toward the front side of the control arm. Attach the two bolts and nuts. Put the nut on the top stud of the ball joint and dont forget to install that grease fitting. Attach the new lower control-arm bumper by its two nuts and bolts.