Install the rear sway bar. Youll notice that the rear bolt for the control arm also holds the sway bar. Make sure the bracket goes on before the nut or youll have to take it back off again. Once everything is bolted back on the car, go around and torque all of the bolts. The upper-control-arm bolts should be 81 lb-ft. The ball joints should be 41 lb-ft (lower) and 33 lb-ft (upper). The front lower control-arm bolt should be 125 lb-ft and the rear gets tightened up with the sway bar bolts, 41 lb-ft (upper) and 70 lb-ft (lower).