Corvette Fever Homepage Corvette Fever
Facebook Click here to find out more!

Hid Install Ballast

Prev  Next
 
Hid Install Ballast
Hid Install Ballast
A piece of two-sided foam tape is provided to attach the ballast to the inner fender. The two-sided tape allows you to stick it into position, then screws are supplied to positively retain the ballast. The instructions warn you not to cover the serial number on the backside of the unit in case you need to order a replacement ballast. View Related Article
Hid Install Finished Product Hid Install Alltrade Powerbuilt Rollaway Toolbox Hid Install Remove Headlamp Top Cover Hid Install Score Aluminum Headlight Bucket Hid Install Break Off Aluminum Rib Hid Install Finished Product Hid Install Tap Threads In Plastic Housing
Hid Install Install Top Outer Screws Hid Install Install Screw Hid Install Tightening Screws Hid Install Ballast Hid Install Install Ballast Hid Install Wiring Hid Install Connect Single Wires
Hid Install Connect Wires To Ballast Hid Install Remove Coolant Reservoir Hid Install Working On Install Hid Install Battery Wires To Stud On Fuse Panel Hid Install Connect Wire To Ground Stud Hid Install Wires Near Hood Hinge Hid Install Tighten Screws
Hid Install Finished Product
Trade In Value