Corvette Fever Homepage Corvette Fever
Facebook Click here to find out more!

Hid Install Battery Wires To Stud On Fuse Panel

Prev  Next
 
Hid Install Battery Wires To Stud On Fuse Panel
Hid Install Battery Wires To Stud On Fuse Panel
The wire connectors are provided and should be crimped on with a proper crimping tool. The battery wires are then connected to the stud on the fuse panel and tightened. Watch the positioning of the terminals so the plastic cover can be reinstalled. Remember the stud is battery power hot all the time. View Related Article
Hid Install Finished Product Hid Install Alltrade Powerbuilt Rollaway Toolbox Hid Install Remove Headlamp Top Cover Hid Install Score Aluminum Headlight Bucket Hid Install Break Off Aluminum Rib Hid Install Finished Product Hid Install Tap Threads In Plastic Housing
Hid Install Install Top Outer Screws Hid Install Install Screw Hid Install Tightening Screws Hid Install Ballast Hid Install Install Ballast Hid Install Wiring Hid Install Connect Single Wires
Hid Install Connect Wires To Ballast Hid Install Remove Coolant Reservoir Hid Install Working On Install Hid Install Battery Wires To Stud On Fuse Panel Hid Install Connect Wire To Ground Stud Hid Install Wires Near Hood Hinge Hid Install Tighten Screws
Hid Install Finished Product
Trade In Value