Corvette Fever Homepage Corvette Fever
Facebook Click here to find out more!

Engine Removal Pt2 Release Engine Bay Closeout Panel

Prev  Next
 
Engine Removal Pt2 Release Engine Bay Closeout Panel
Engine Removal Pt2 Release Engine Bay Closeout Panel
Pull up on the plastic rivets (left) to release the engine bay closeout panel and pull the panel out of the engine bay. Unplug the vacuum lines and six connectors behind the passenger-side wheelhouse to release the engine harness from the vehicle body. View Related Article
Engine Removal Pt2 Drivetrain Pulled Out Engine Removal Pt2 Disassemble Rear Suspension Engine Removal Pt2 Loosen Suspension Engine Removal Pt2 Remove Harness Engine Removal Pt2 Remove Halfshaft Engine Removal Pt2 Remove Sway Bar Bolts Engine Removal Pt2 Remove Hard Line Brake Lines
Engine Removal Pt2 Remove Ground Wires Engine Removal Pt2 Disconnect Main Wiring Engine Removal Pt2 Undo Steering Shaft Knuckle Fastner Engine Removal Pt2 Disconnect Main Underhood Wiring Engine Removal Pt2 Remove 7Mm Bolt Engine Removal Pt2 Remove Pcm Wiring Engine Removal Pt2 Remove Compressor
Engine Removal Pt2 Remove Alternator Engine Removal Pt2 Remove Battery And Battery Tray Engine Removal Pt2 Pull Fuse Panel Off Engine Removal Pt2 Plastic Rivets Engine Removal Pt2 Release Engine Bay Closeout Panel Engine Removal Pt2 Disconnect Air Tube Engine Removal Pt2 Stand
Engine Removal Pt2 Raise Body Off Ground
Trade In Value