Two Torx screws are also found under the flip-up cover to the ashtray/lighter compartment-one is next to the lighter and the other is behind the ashtray-remove both of these Torx screws. When these are out, put the gear lever in drive (or Second if it's a stick), push back on the armrest console as far as it will go, and lift the tail of the console up and back; unsnap the electrical connector attached to the cigarette lighter and continue to lift and remove the console. Slip it over the gear shifter and get it out of the way. This takes a bit of doing, as it is a tight fit and it can be stubborn. Just take your time, have perseverance and patience, and, eventually, it will come out.