Stop That Shark: Brake Upgrades for '68-'82s
|
Connecting our braided brake lines will complete the front brakeinstallation. To secure the front brake lines, place a copper washer onboth sides of the banjo fitting and secure with the banjo bolt (torquebolt to 12 lb-ft). Make sure there is no twist in the brake line. Thebanjo should fit against the caliper without twisting the line. You canremove line twist by adjusting the connection at the line-mountingbracket. Tighten the fitting on the caliper first. Use a wrench to holdthe braided-line fitting in place at the mounting bracket and tightenthe flair fitting on the hard line until tight. View Related Article
|
|