Corvette Fever Homepage Corvette Fever
Facebook Click here to find out more!

Gts Quarter Panel Install Adhesive Fiberglass Residue

Prev  Next
 
Gts Quarter Panel Install Adhesive Fiberglass Residue
Gts Quarter Panel Install Adhesive Fiberglass Residue
The adhesive and fiberglass residue on the original bonding strip where the old panel was attached had to be cleaned away. A 40-grit wheel on an air grinder quickly smoothed down the area to bare fiberglass. Note the "flange" revealed by the grinding-that's the factory bonding strip. View Related Article
Gts Quarter Panel Install Fender Gts Quarter Panel Install Fender Gts Quarter Panel Install New Wider Rear Fender Gts Quarter Panel Install Gts Quarter Panels Gts Quarter Panel Install Missing Vertical Bonding Strip Gts Quarter Panel Install Adhesive Fiberglass Residue Gts Quarter Panel Install Old Quarter Panel
Gts Quarter Panel Install Cutting Old Panel Gts Quarter Panel Install 40 Grit Wheel Gts Quarter Panel Install Dry Fit Panel Gts Quarter Panel Install Panel Attached With Wood Screws Gts Quarter Panel Install New Panel Ready To Be Bonded To Car Gts Quarter Panel Install Panel Screwed Clamped Gts Quarter Panel Install Screws Removed
Gts Quarter Panel Install Screw Holes Touched Up With Die Grinder Gts Quarter Panel Install Fiverglass On Body Gts Quarter Panel Install Continued Fiberglass Gts Quarter Panel Install Skim Coat Of Mar Glass Filler Adhesive Gts Quarter Panel Install Finish
Trade In Value