|
|
 9 We placed the headliner...  9 We placed the headliner on the fabric, pressing firmly to make certain it adhered well.  10 Then we carefully trimmed...  10 Then we carefully trimmed off the excess headliner fabric with a razor blade, leaving enough material to roll up around the sides of the headliner.  11 Shape the corner in this...  11 Shape the corner in this manner to avoid lumps in the headliner surface.  12 Using a blunt, plastic...  12 Using a blunt, plastic blade such as a putty applicator, begin working the edges of the design and the flat surfaces of the headliner. Be patient and make certain you do not crush the edges of the design.  13 Work from the inside edges...  13 Work from the inside edges out. This process can take a while-the more time spent here, the better the final, overall effect will be.  14 With our design complete,...  14 With our design complete, we were ready to install the headliner in the top.  15 Again, use lots of adhesive...  15 Again, use lots of adhesive to stick the headliner in place. Apply adhesive to the back of the headliner insert as well.  16 The final look is not...  16 The final look is not only functional, but an attractive added feature for our Corvette.
|