Corvette Axleshaft U-Joint Replacement - Tightening Up Your Rearend
|
8 As '63-'82 original Corvette pieces become harder and harder to locate, we find ourselves trying to reuse the original pieces if possible. We found we could use our press to apply reverse pressure on the trunnion, thus straightening the trunnion out. This is one of those easy-does-it fixes. You have to apply enough pressure to go beyond perfectly straight so when the pressure is released, the trunnion is flat. The good part is you can sneak up on it, applying a little more pressure each time until the desired effect is achieved. View Related Article
|
|