|
|
 MTI includes these custom-built,...  MTI includes these custom-built, 171/48-inch long-tube, stainless steel headers in their Stage I package.  Roman Hackett removed the...  Roman Hackett removed the LS-7 valve cover on the passenger side prior to header installation. Removing the valve cover provided him with just enough room to install the right-side header. This was not necessary on the driver side.  Once the headers were secured,...  Once the headers were secured, Roman added Denso iridium spark plugs and MTI Racing spark plug wires.  The plugs, wires, and headers...  The plugs, wires, and headers have been successfully installed. Notice how the plug wires are designed to not touch the headers. Many aftermarket wires do not offer this feature.  The headers are designed to...  The headers are designed to flow smoothly into the collector with no connectors until the cats. This maximizes airflow.  Next, the Random Technology...  Next, the Random Technology high-flow cats were installed.  The remaining exhaust was...  The remaining exhaust was fitted, including a cross-pipe that will connect to the factory cat-back exhaust.  Once Roman connected the exhaust,...  Once Roman connected the exhaust, he used floor jacks to support the pipes. He tack-welded the two pipes exiting the cross-pipe to secure the fit. He then removed the cross-pipe and the two pipes, and seam-welded them on the workbench. This process eliminated two clamps.  The finished system fits nicely...  The finished system fits nicely under the Z06; it didn't produce any rattles nor did it change the exhaust note-a very professional installation.
|