BRINGING UP THE REAR Here...
BRINGING UP THE REAR
Here is a better look at all these parts coming together tocreate one bad ass Vette-Rod. New taillights, parking lights,and license plate assemblies were provided courtesy ofCorvette Central. The proprietary Corvette Restoration AZwide-body kit is very subtle, yet makes a serious performancestatement.
SHAKE IT DOWN Finally, out...
SHAKE IT DOWNFinally, out on the open road, this is one of the first spinsaround the block. What a thrill!
RISING PHOENIX Phoenix Graphics...
Phoenix Graphics supplied the stencil kit for the hood stinger.It was easier for us to remove the hood and paint the stingerfirst, and then line up the hood and paint the tip with the hoodafter the final adjustments. The hood was on and off the car somany times, this method ensures a perfect alignment. The frontlicense plate bar was provided by Keen Parts.
STING LIKE A BEE The hood...
STING LIKE A BEE
The hood stinger is now complete. Sitting outside the shop, theTimber Wolf C2's sidepipes came rumbling to life thanks toCorvette Central. The next trip will be to an alignment shop.
CRUISE NITES One of the shakedown...
One of the shakedown cruises tookus to a weekly cruise-in event heldat a local Scottsdale McDonald's inthe Pavilion's. The Timber WolfCorvette created quite a stir, andthere was always a crowd gatheredaround it.