There are some chemicals you'll undoubtedly need at one time or another when working on, maintaining, or cleaning your Corvette, and that's the topic for this month. And I'm not talking about namby-pamby stuff here, no siree! I'm talking about stuff that really gets the job done in short order with minimal elbow grease-very powerful potions.
Quick Tip
If you've ever reupholstered the seats in your Corvette, then you know what a chore it is to stretch the seat cover fabric, and while keeping it taut, load a hog ring into your hog-ring pliers. At times like these a third hand would certainly come in handy. Well, how about the next best thing? Simply pre-load the hog ring into your pliers and use a rubber band around the handles to put pressure on them to keep the hog ring from falling out. Stretch the fabric, grab the pliers, and squeeze the ring on with no fumbling. Simple but effective.
Due to their powerful nature, I highly recommend wearing some protective gloves when using them. I'm a fan of disposable nitrile gloves since they are inexpensive, more chemical resistant, and last longer than latex gloves. And while I'm on the caution bandwagon, let me also mention that some of these powerful potions contain corrosive chemicals that may damage your nice painted garage floor or even the tarmac of your driveway (particularly if you've used blacktop driveway coating). I know from experience that some of them will wreak havoc with your lawn, so use caution and common sense when using them. And be sure to follow the manufacturer's instructions.
That being said, let's talk about what's available to do what and how well it does it.
Grease and grime build up on your engine, transmission, and other mechanical parts, especially if you put lots of miles on your Corvette. I've found that Spray Nine does a really good job of removing light-to-moderate surface grease. You just spray it on, let it set for a few minutes, and then hose it off. Don't let it set for more than a few minutes before rinsing it off since this stuff is really powerful. If you've got a huge accumulation of gunk on your engine, bellhousing, around the oil pan, or other areas of your motor and drivetrain, then you'll probably want to use something that's industrial strength for grease removal, and STP Engine Degreaser does a super job. Again, since it's an aerosol, you simply spray it on, let it do its thing, and then hose it off.
 Degreaser ::: Spray Nine...  Degreaser ::: Spray Nine is a great all-purpose degreaser. STP Engine Degreaser is the industrial-strength solution for cleaning off the grease, grime, and accumulated muck from your engine, transmission, and powertrain components. |  Solvents: Denatured wood...  Solvents: Denatured wood alcohol and rubber cement solvent/thinner are great solvents to have on hand in your garage for removing oil, grease, adhesive residues, and other tasks where degreasing surfaces is important. Both are highly flammable, however, so use caution with them and be sure to have adequate ventilation. | |
Solvents are very handy potions to have on hand for all sorts of tasks, from removing light grease and oil from surfaces to dissolving sticky adhesive residues, and general cleaning and surface prep chores. Denatured wood alcohol is an old standby that I always have on hand; it has myriad uses in the garage and workshop. Another good thing to have is rubber cement solvent and thinner, which works well and evaporates quickly, too. Both of these liquids are highly flammable, so use them responsibly, keep their containers tightly capped when not in use, and, by all means, be sure you have adequate ventilation when using them.