|
|
 Bracket installation requires...  Bracket installation requires a 12mm Allen socket. Torque to 110 ft-lb.  Tighten caliper relocation...  Tighten caliper relocation brackets. Torque to 110 ft-lb.  To remove old rear pads, first...  To remove old rear pads, first compress the piston into the caliper as the new pads are full thickness.  We install the new Baer Sport...  We install the new Baer Sport Touring pads.  Install the new Baer EradiSpeed...  Install the new Baer EradiSpeed rotor, and retain it with one lug nut and washer to hold it in place for caliper installation.  Here's the directional label....  Here's the directional label. It's important for directional vanes that are for cooling airflow.  When installing the caliper...  When installing the caliper with new pads, slip it over the new Baer rotor, and retain it with new bolts provided with the brake system. Torque to 110 ft-lb.  Reinstall the rear wheel and...  Reinstall the rear wheel and torque the lug nuts to 80 ft-lb. Repeat R&R procedure on the opposite side of the car. After installation, the break-in period is approximately 200-300 miles of gentle driving to allow seasoning of new cast-iron rotors. Job done!
|