C5 Corvette Interior Upgrades - Cover Me Up

For photography purposes,... 

   

  read full caption

For photography purposes, we're concentrating on the passenger side of the car. With the old carpet and the top part of the forward console bezel removed, Matt first prefits the passenger-side front carpet.

After 5-10 years of regular use, the carpet in your C5 is likely looking quite worn. Fortunately, as a Corvette owner, you have lots of options when it comes to installing new carpet.

Mid America Motorworks produces most of its own carpets on-site at its Effingham, Illinois, campus under the Performance Choice brand. Mid America has excellent print and online catalogs, so ordering the carpet for your particular application is easy.

While re-covering your C5 seats seems like a big job to many, installing a new carpet set correctly is not that difficult. While we were at Mid America Funfest installing the rest of Project C5X's interior, Matt Daniels volunteered to help us document the carpet install procedure. I again want to thank him and Nancy Bushur for their help with this article. Let's get some new carpet in there!

Cut the carpet for the passenger...        read full caption Cut the carpet for the passenger front air vent located on the side of the transmission tunnel.	Here's an up-close view of...        read full caption Here's an up-close view of the passenger front air vent.	Locate the correct position...        read full caption Locate the correct position to cut for the passenger front-seat-control wire opening.
Cut the passenger front seat...        read full caption Cut the passenger front seat control wire opening into a T-shape.	Use Velcro to attach the passenger...        read full caption Use Velcro to attach the passenger front carpet onto the emergency-brake boot. Note that the forward console bezel and rear console have been removed.	Prior to starting this install,...        read full caption Prior to starting this install, the fuse-block cover located in the passenger front floorboard was removed. Matt reattaches the cover after the carpet is positioned around the fuse block.