C3 Corvette Fender Flares - Open Wide
|
A simple wire gage is used to make a line of sight determination of the height of the relocated wheel lip, which can be adjusted by the curve of the mounting brackets. Our final position was just slightly raised from stock (about 1/8-inch). Since the lip is spaced out, the radius of curvature of the lip will no longer meet the quarter, and given the original angle of the lip, the joint needed to go up about as much as out, so a tape line was set at 1.25 up off the quarter cut, and tapering slightly to the sides. View Related Article
|
|