There are items that add a distinctive performance look to your Corvette, and some of those include a considerable measure of actual performance. Among these is the front spoiler. From the standpoint of function, a front spoiler deflects a portion of the airflow that would otherwise end up under the car, creating undesirable front-end lift at speed, improving stability. A good chunk of this deflected air finds its way through the radiator, which often provides a bonus in terms of improved engine cooling.
With these credible benefits at hand, it was no wonder that GM saw fit to install a spoiler at the front of production Corvettes for the '78 Indy Pace Car version. This factory spoiler became an option in the following year, while later Corvettes had a redesigned front fascia with an even more extensive air dam.
A real front spoiler wasn't a factory offering for our '76 Stingray project car. A factory Corvette in that year features large cooling holes in the lower valance blanking panel, used in tandem with a polyurethane baffle at the trailing edge. The baffle is designed with a lower lip protruding downwards as a sort of mini-spoiler, directing airflow through these holes and into the radiator area. While this imparts a degree of functionality, from the standpoint of style, the baffle just isn't the same as a true spoiler incorporated into the bodywork.
Here's a view under the custom modified fiberglass nose of our '76 Corvette, revealing the
All that said, we were eager to add a front spoiler to our '76 Stingray, both to reap the potential performance improvements as well as for the great looks. We ordered a new spoiler (PN 10291) from Eckler's. This one-piece custom spoiler is similar to the factory offering but has rounded corners, which we felt better complemented the swooping lines of our car than the squared-off outer corners of the '78 factory unit. If preferred, Eckler's also offers the factory-styled spoiler (PN 10289), which comes at the same retail price.
These spoilers are one-piece bolt-on units, designed to utilize the mounting provisions for the factory air baffle at the rear of the valance. The factory air baffle does double-duty, with the lower lip serving as an air deflector, while the upper portion blanks the area between the lower valance and the radiator crossmember, forcing airflow through the radiator. The replacement spoiler will take the place of the air deflection function of the stock baffle, but the upper part of the baffle is still needed to blank the area below the radiator closed. To accomplish this, the lip portion of the factory baffle is cut off, and the top portion blanking the radiator is retained. For our installation, we left off the baffle completely for now and will be fabricating a custom sheet-aluminum blanking panel to serve the same purpose.
We were impressed with the fit of the Eckler's spoiler but even more excited by the purposeful and racy look it added to the front of our project car. As noted, the spoiler bolts on via the stock bolt holes used to mount the production baffle, but two additional fasteners are required at the fenders. Eckler's solution is a bolt-and-washer arrangement that clamps the top edge of the spoiler at the fender, requiring no drilling in the stock bodywork. While drilling no holes may be an important consideration to some Corvette owners, we could see room for improvement in the mounting technique if the stock fender lip is drilled for a series of through-bolts along the inside lip.
|Difficulty Index - 2 Wrenches|
|Anyone's Project: no tools required||1 Wrench|
|Beginner: basic tools||2 Wrenches|
|Experienced: special tools||3 Wrenches|
|Accomplished: special tools and outside help||4 Wrenches|
|Professionals Only: send this work out||5 Wrenches|
A view from the rear clearly shows how the factory black plastic baffle blanks the area fr
These are obviously not the original fasteners retaining our car's baffle. Years of use ha
With the baffle removed, a large, open area is created below the radiator. It's easy to se
Normally, the baffle would be cut at the tape line shown here to remove the lower lip, and
This is our custom spoiler from Eckler's (PN 10291). The spoiler deflects considerably mor
We liked the shape of the 10291 spoiler, with its sweeping and rounded corners. A stock-st
The Eckler's spoiler is predrilled to utilize the factory fastener provisions. We decided
The front edge of the spoiler should meet the downturned lip of the valance exactly. We we
The outer edge of the spoiler may seem a little wide while it's just hanging loose, but th
We used some small C-clamps to gently bring the spoiler lip tight to the fender. Don't use
To avoid drilling holes in the stock bodywork, the spoiler is secured at the fender edge w
With the spoiler secured to the fender, the edge as visible from the front of the car matc
The finished product lends an aggressive, high-performance look to a C3 Corvette nose.