Featured Chevrolet Corvette
Corvette Tech Articles
Corvette Events & Auto Shows
How To Guides
Corvette Project Cars
Corvette History & Historical Articles
Corvette Wallpapers & Desktop Themes
Corvette Fever Community
Subscribe to Corvette Fever Magazine
C3 Transmission Swap - Grabbin' New Gea...
Shifter Console Assembly
C3 Transmission Swap - Grabbin' New Gears
We Install Keisler Engineering's New T45-RS Into A '69 C3
By Alan L. Colvin, Photography by Alan L. Colvin, Keisler Automotive
November 01, 2009
Next we set the shifter tower assembly to the T45-RS.
Tightening down the shifter tower.
Next we assemble and tighten the lower shift boot retainer screws.
Apply Loctite Blue to shifter handle bolt.
Assemble shifter handle to transmission.
...assemble fiber optic panel...
...and re-install the cigarette lighter.
Re-install the console top plate with the trick Keisler 5-speed pattern plate.
Apply Loctite Blue to shifter knob thread prior to installing the shifter ball.
The T45-RS install is now complete. Stay tuned for next month when we drive the C3 with this new tranny!
The T45-RS install is now complete. Stay tuned for next month when we drive the C3 with th
Get out of the slow lane! At just 2200 RPM you will be cruising at 68 to 83 MPH depending on what rear axle ratio your Corvette is currently equipped with. Check out this T45-RS speed table at www.keisler auto.com to dial in your own Vette!
Get out of the slow lane! At just 2200 RPM you will be cruising at 68 to 83 MPH depending
View Full Article
By Alan L. Colvin
Enjoyed this Post? Subscribe to our RSS Feed, or use your favorite social media to recommend us to friends and colleagues!
User Submitted Content
, Source Interlink Media
All rights reserved.